Section Valve Test 9750
Sectional valves consist of multiple sections assembled together to form a stack to be used in mobile applications.
Tests & Measurements
Sectional valves consist of multiple sections assembled together to form a stack to be used in mobile applications. A typical stack consists of 2 to 10 sections with each section being selected for a specific function. Sections consist of a directional control spool with or without a float position, proportionally actuated mechanically, hydraulically, or electrically. Sections may include workport reliefs, PO checks, pre or post pressure comp and flow limiters. Sections may utilize a load sense feature for pump control or be of an open center design for use with positive displacement pumps.
Titan has taken two approaches to test sectional valves. In one approach, the section is tested alone and then a very simple test is performed on the complete stack. A second approach is to perform section level testing after assembled into the stack. The approach is usually governed by the customer, although Titan can discuss the pros and cons of each.
- Pressure range 10-350 BAR
- Flow range 0-350 LPM
- Quick changeover
- CAN Communication
- Accommodate all actuation types
- Integrated flow meters and pressure transducers
- Micro Leakage Capability and Simultaneous Leak Testing
- Automated calibration routines
*We understand that customers have unique requirements and we can design and build test stands to accommodate a broad range of applications. Contact us today.
- Flow vs. Signal
- Flow vs. Pressure (Load)
- Pressure drops
- Load Sense Functionality
- Pilot Pressure Setting